MOD 1.0 vs. MOD 1.5 Gears: Is Bigger Really Better for Your X-Maxx or XRT?
Updated November 5, 2026 · 3 min read
If you're upgrading the spur gear on your Traxxas X-Maxx or XRT, you've probably come across two options: MOD 1.0 and MOD 1.5.
Both can handle serious 8S power when properly matched and installed. But what's the difference, and is switching to MOD 1.5 actually worth it?
Here's what you should know before buying.
What's the Difference Between MOD 1.0 and MOD 1.5?
MOD (module) refers to the size of a gear's teeth. The higher the number, the larger the tooth profile.
- MOD 1.0: Smaller teeth, commonly used in factory X-Maxx and XRT gearing. A good choice for stock and moderately upgraded trucks.
- MOD 1.5: Larger, thicker teeth designed to provide greater strength under heavy drivetrain loads. Popular with high-power builds and aggressive bashers.
The larger, thicker teeth of MOD 1.5 gears generally provide greater strength and resistance to tooth damage under heavy loads and high torque compared to MOD 1.0 gears.
However, MOD 1.5 doesn't automatically make your truck faster or more powerful. That depends on your gearing ratio, motor, ESC, and overall setup.
Which One Should You Buy?
Choose MOD 1.0 if:
- You're running a factory or mildly upgraded power system.
- You want to retain your existing MOD 1.0 pinion.
- You prefer a straightforward hardened steel spur gear upgrade.
- Your current gear setup has been reliable.
For many drivers, a quality hardened steel MOD 1.0 spur gear is more than sufficient.
Consider MOD 1.5 if:
- You're running a high-torque aftermarket motor and ESC.
- You frequently strip or damage gear teeth under heavy loads.
- You run oversized tires or subject your truck to aggressive bashing.
- You're building a heavy-duty drivetrain and are willing to change the pinion.
MOD 1.5 offers a stronger tooth profile, but the entire setup needs to be matched correctly.
Important: MOD 1.0 and MOD 1.5 Cannot Be Mixed
This is one of the most common mistakes when upgrading RC gearing.
A MOD 1.5 spur gear requires a MOD 1.5 pinion gear. The two pitches have different tooth profiles and cannot mesh correctly.
You'll also need to consider:
- Gear ratio: A 35T MOD 1.5 spur does not provide the same gearing ratio as a 46T or 50T MOD 1.0 spur when paired with the same tooth-count pinion.
- Motor shaft diameter: Your new pinion must fit your motor shaft.
- Motor mount: Certain MOD 1.5 combinations require an adjustable aftermarket motor mount.
- Gear mesh: Improper mesh can damage even hardened steel gears.
Do not assume the factory motor-positioning pins will work with a custom gear combination. Check the mounting arrangement and set the mesh correctly.
Does MOD 1.5 Make Your X-Maxx Faster?
Not by itself.
Your spur-to-pinion tooth-count ratio determines the gearing, not the MOD number alone.
Want more speed? Taller gearing can increase top speed, but it also puts more strain on your motor and ESC.
Want stronger acceleration and lower motor temperatures? Shorter gearing generally provides more torque multiplication and reduces motor load, although temperatures still depend on your setup and driving conditions.
The key is choosing the right spur and pinion combination for your driving style, not simply switching to MOD 1.5.
After changing gearing, monitor motor and ESC temperatures during short test runs.
Our Recommendation
For most stock or lightly modified Traxxas X-Maxx and XRT trucks, hardened steel MOD 1.0 gearing is an excellent starting point.
If you're pushing substantially more power, running heavy tires, or repeatedly damaging gears, MOD 1.5 is worth considering.
Cobra Racing offers three hardened steel spur gear options:
- 46T MOD 1.0: A hardened steel option for compatible MOD 1.0 drivetrain setups.
- 50T MOD 1.0: Another MOD 1.0 option for drivers selecting a different gearing ratio.
- 35T MOD 1.5: A heavy-duty option for drivers building a compatible MOD 1.5 drivetrain.
Whichever option you choose, proper gear mesh, compatible components, secure mounting, and appropriate gearing are essential for long-term reliability.
The bottom line: If you're running a stock or lightly upgraded X-Maxx or XRT, hardened steel MOD 1.0 gearing is a solid choice. If you're building a high-power basher or regularly damaging spur gears, MOD 1.5 may be the better investment. Just make sure your pinion, motor mount, and gear mesh are compatible.