When you're ready to take your Arrma 6s to the next level, upgrading key components can make all the difference. One essential area where performance meets durability is the differential housing. Whether you're bashing through rough terrain or racing at top speed, a robust and efficient differential housing is crucial for ensuring the longevity of your vehicle’s drivetrain. Cobra Racing introduces the ALL ALUMINUM Arrma 6s Differential Housing, specifically designed for Arrma 6s BLX and EXB models. This red aluminum gearbox not only provides a stronger foundation for your gears but also comes equipped with sway bar mounts for added stability.

Let's dive deep into why this upgrade is a game-changer for your Arrma 6s and how it enhances the overall performance of your RC vehicle.

Why Upgrade to the Arrma 6s Differential Housing?

When you're pushing your Arrma 6s BLX or EXB to its limits, the stock plastic differential housing can be a potential weak point. Over time, plastic housings can warp, crack, or wear out, especially under the high-stress conditions of aggressive driving. The Arrma 6s Differential Housing made from high-quality aluminum not only improves strength but also reduces wear on other internal components.

Here’s why upgrading to this aluminum differential housing is a smart move:

1. Enhanced Durability

The stock differential housing is typically made of plastic, which is more prone to cracking under pressure. Aluminum, on the other hand, is more resistant to impact, reducing the risk of damage during crashes or under heavy loads. By upgrading to Cobra Racing's Arrma 6s Differential Housing, you'll extend the life of your vehicle's drivetrain, ensuring that it holds up under extreme conditions.

2. Improved Heat Dissipation

Plastic housings tend to retain heat, which can lead to premature wear on internal gears and bearings. Aluminum, in contrast, has excellent heat dissipation properties, helping to keep your gearbox cooler during extended use. This not only improves performance but also extends the lifespan of your differential gears.

3. Increased Rigidity

The rigidity of the aluminum housing ensures that your gears remain in perfect alignment, even under the most demanding conditions. This precision minimizes wear and tear on your gears and bearings, reducing maintenance costs and downtime.

4. Aesthetic Appeal

Beyond functionality, let’s not forget about the visual impact. The red anodized finish of Cobra Racing's Arrma 6s Differential Housing gives your RC vehicle a sleek, high-end look. Not only will your vehicle perform better, but it’ll also stand out on the track.

Key Features of the Arrma 6s Differential Housing

To better understand the benefits of upgrading, let's break down the key features of this aluminum differential housing:

High-Quality Aluminum Construction

This differential housing is machined from premium-grade aluminum, ensuring superior strength and resistance to impacts. Compared to the stock plastic housing, aluminum provides enhanced durability, making it ideal for heavy bashers and racers alike.

Red Anodized Finish

The striking red anodized finish not only adds a layer of corrosion resistance but also gives your vehicle a custom, high-performance appearance. The finish also provides protection from dirt, debris, and environmental wear.

Pre-Installed Sway Bar Mounts

The inclusion of sway bar mounts is a unique feature of this housing. These mounts allow you to easily attach sway bars to your vehicle, improving stability and handling. Sway bars help to reduce body roll during cornering, making your Arrma 6s more responsive and easier to control.

Perfect Fit for Arrma 6s BLX and EXB Models

This Arrma 6s Differential Housing is designed to be a direct fit for popular Arrma 6s models, including the BLX and EXB. The precise machining ensures a perfect fit, so you can install it with minimal hassle.

Compatible with OEM Parts

One of the major advantages of this aluminum housing is that it is fully compatible with original equipment manufacturer (OEM) parts. This means you don’t need to buy additional components or worry about fitment issues. You can upgrade your housing while keeping the rest of your drivetrain intact.

Installation Tips for the Arrma 6s Differential Housing

Upgrading to an aluminum Arrma 6s Differential Housing is a straightforward process, but there are a few tips to keep in mind for a smooth installation:

1. Gather Necessary Tools: Before starting, ensure you have the necessary tools, including a hex driver set, a pair of needle-nose pliers, and a thread-locker for the screws.

2. Disassemble the Stock Differential: Begin by removing the wheels, suspension arms, and any other components that might obstruct your access to the gearbox. Carefully disassemble the stock plastic housing and take note of how the gears are positioned.

3. Inspect Gears and Bearings: Before installing the new housing, check your gears and bearings for wear. This is a good time to replace any damaged components.

4. Apply Thread Locker: For added security, apply a small amount of thread locker to the screws when installing the new housing. This will prevent them from loosening due to vibration.

5. Reassemble and Test: Once installed, reassemble your Arrma 6s and take it for a test run. Pay attention to any unusual noises or vibrations, which could indicate misalignment.

Benefits of Using an Aluminum Gearbox for Your Arrma 6s

The benefits of upgrading to an aluminum gearbox, such as the Arrma 6s Differential Housing, extend far beyond durability. Let’s take a closer look at how this upgrade impacts your vehicle’s overall performance:

1. Longer Lifespan

The most obvious benefit is the increased lifespan of your differential housing. Aluminum is far more durable than plastic, meaning fewer replacements and less downtime.

2. Consistent Performance

With the enhanced rigidity and better heat dissipation, you can expect more consistent performance, even during extended runs. The aluminum housing helps keep your gears aligned and prevents heat-related issues.

3. Reduced Maintenance

Because aluminum reduces wear and tear on internal components, you'll spend less time performing maintenance and more time enjoying your RC vehicle.

4. Increased Stability

Thanks to the sway bar mounts, you can easily install sway bars to improve your vehicle’s stability, especially during high-speed cornering. This added stability enhances control, allowing you to push your Arrma 6s to its limits.

Final Thoughts: Why Choose Cobra Racing’s Arrma 6s Differential Housing?

In the world of RC vehicles, every component plays a crucial role in ensuring peak performance and durability. The Arrma 6s Differential Housing from Cobra Racing is more than just an upgrade—it's an investment in the longevity and reliability of your Arrma 6s BLX or EXB. By choosing this high-quality aluminum housing, you're ensuring that your vehicle is ready for anything, from high-speed races to rugged off-road adventures.

Whether you're a seasoned RC enthusiast or a casual hobbyist, this differential housing upgrade is one of the best ways to enhance the performance of your Arrma 6s. With the added benefits of sway bar mounts, superior durability, and improved heat dissipation, this upgrade is a must-have for any serious RC driver.

For the best results, always choose trusted parts from reliable brands like Cobra Racing. Their commitment to quality ensures that the Arrma 6s Differential Housing is not just a replacement, but a true performance-enhancing upgrade.

Conclusion
In summary, upgrading to Cobra Racing’s Arrma 6s Differential Housing ensures greater durability, heat management, and handling precision for your vehicle. Give your Arrma 6s the upgrade it deserves and experience improved performance on every terrain.